Authentication-Type - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation

authentication-type

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
1964
®
OS for EX Series Ethernet Switches, Release 10.4
Configuring the Authentication Key Update Mechanism for BGP and LDP Routing
Protocols
Configuring BFD Authentication for Static Routes
authentication-type authentication;
[edit logical-systems logical-system-name protocols isis level level-number],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis level level-number],
[edit protocols isis level level-number],
[edit routing-instances routing-instance-name protocols isis level level-number]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable authentication and specify the authentication scheme for IS-IS. If you enable
authentication, you must specify a password by including the
statement.
If you do not include this statement and the
authentication is disabled.
—Authentication scheme:
authentication
md5 —Use HMAC authentication in combination with MD5. HMAC-MD5 authentication
is defined in RFC 2104, HMAC: Keyed-Hashing for Message Authentication.
—Use a simple password for authentication. The password is included in the
simple
transmitted packet, making this method of authentication relatively insecure. We
recommend that you not use this authentication method.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
authentication-key on page 1960
no-authentication-check on page 2115
Configuring IS-IS Authentication
authentication-key
statement, IS-IS
authentication-key
Copyright © 2010, Juniper Networks, Inc.