Table 34: Ip Protocol Name And Type Numbers - Juniper NETWORK AND SECURITY MANAGER 2010.2 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
346
you use a context binding of first packet, you must leave the attack pattern empty.
Table 34 on page 346 lists the supported protocol types.

Table 34: IP Protocol Name and Type Numbers

Protocol Name Protocol Type Number
IGMP 2
IPIP 4
EGP 8
PUP 12
TP 29
IPV6 41
ROUTING 43
FRAGMENT 44
RSVP 46
GRE 47
ESP 50
AH 51
ICMPV6 58
NONE 59
DSTOPTS 60
MTP 92
ENCAP 98
PIM 103
COMP 108
RAW 255
ICMP, TCP, and UDP—Attacks that do not use a specific service might use a specific
protocol to attack your network. Some TCP and UDP attacks use standard ports to
enter your network and establish a connection; to detect these attack, configure the
Copyright © 2010, Juniper Networks, Inc.