Baseline Tcp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline tcp

baseline [ ip | ipv6 ] tcp [ vrf vrfName ] [ localAddress localPort remoteAddress
Syntax
remotePort ]
Command introduced in JUNOSe Release 7.2.0.
Release Information
ip keyword made optional in JUNOSe Release 7.2.0.
ipv6 keyword added in JUNOSe Release 7.2.0.
Sets a baseline for all TCP statistics or for only IPv4 or IPv6 TCP statistics. The router
Description
implements the baseline by reading and storing the statistics at the time the baseline
is set and then subtracting this baseline whenever baseline-relative statistics are
retrieved. There is no no version.
Options
Privileged Exec
Mode
272
baseline tcp
ip Implements a baseline for only IPv4 statistics
ipv6 Implement a baseline for only IPv6 statistics
vrfName Name of the VRF; string of 1–32 alphanumeric characters
localAddress—Local IP or IPv6 address on the router
localPort—Local TCP port number on the router
remoteAddress—IP or IPv6 address of remote router
remotePort TCP port number on remote router