Bgp Default Ipv4-Unicast - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 3: B Commands

bgp default ipv4-unicast

[ no ] bgp default ipv4-unicast
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Causes all neighbors subsequently created with the neighbor remote-as or neighbor
Description
peer-group commands to be automatically activated in the IPv4 unicast address
family. The no version disables the IPv4 unicast address family on all neighbors.
Address Family Configuration, Router Configuration
Mode
285
bgp default ipv4-unicast