Baseline Bridge Interface Vpls - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

baseline bridge interface vpls

baseline bridge interface vpls vplsName
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for a VPLS instance on the VPLS virtual core interface, which
Description
represents all of the MPLS tunnels from the router to the remote VPLS edge (VE)
devices. The router implements the baseline by reading and storing the statistics at
the time the baseline is set and then subtracting this baseline whenever
baseline-relative statistics are retrieved. There is no no version.
NOTE: Using the baseline bridge interface vpls command affects the VPLS virtual
core interface, but has no effect on the network interfaces associated with the VPLS
instance. To set a statistics baseline for a VPLS network interface, use the baseline
bridge interface command.
Options
Privileged Exec
Mode
Related Topics
vplsName Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
Setting a Baseline for VPLS Statistics in the JUNOSe BGP and MPLS Configuration
Guide
Chapter 3: B Commands
baseline bridge interface vpls
221