Boolean-Test - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

boolean-test

boolean-test { comparison comparisonType | event eventOwner eventName
Syntax
| startup |
value booleanValue }
no boolean-test [ comparison | event | startup | value ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Defines Boolean test values for the trigger that you are configuring, including
Description
comparison settings, a Boolean value, a startup condition, and binding an event to
the boolean-test trigger. The no version deletes the Boolean-test values for this trigger
or removes either the startup condition or event binding.
Options
SNMP Trigger Configuration
Mode
300
boolean-test
comparisonType One of the following types of Boolean comparison to perform:
(equal, greater, greaterOrEqual, less, lessOrEqual, unequal
eventOwner Name of event owner that partially specifies event to trigger the
Boolean test; string of up to 32 alphanumeric characters
eventName Name of event that partially specifies event to trigger the Boolean
test; string of up to 32 alphanumeric characters
startup Specifies not to perform the Boolean comparison when this trigger first
becomes active
booleanValue Value in the range -2147483648–2147483647 to use for the
Boolean test