Bgp Advertise-Inactive - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bgp advertise-inactive

[ no ] bgp advertise-inactive
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables the advertisement of inactive BGP received routes routes that are considered
Description
by BGP to be " best routes" and therefore are present in the IP forwarding table, but
that are not being used for forwarding. The no version restores the default state of
normal route advertisement, whereby BGP advertises received routes only if they
are in the IP forwarding table and are being used to forward traffic, or if
synchronization is enabled.
Router Configuration
Mode
276
bgp advertise-inactive