Banner - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

banner

banner [ motd | login | exec ] bannerText
Syntax
no banner [ motd | login | exec ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures message-of-the-day, login, or exec banners to be displayed by the CLI. If
Description
you do not specify an option, the behavior is the same as if you specified the motd
option. The no version deletes the banner.
Options
Global Configuration
Mode
motd Displays the banner when a console or vty connection is initiated
login Displays the banner before any user authentication (line or RADIUS
authentication); the banner is also displayed if user authentication is not
configured
exec Displays the banner after user authentication (if any) and before the first
prompt of a CLI session
bannerText Alphanumeric string truncated at 1024 characters; delimited by the
first character of the string, which must be repeated at the end of the string and
must not occur anywhere else in the string
Chapter 3: B Commands
215
banner