Baseline Clns - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline clns

baseline clns [ interfaceType interfaceSpecifier ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for CLNS. The router implements the baseline by reading
Description
and storing the statistics at the time the baseline is set and then subtracting this
baseline whenever baseline-relative statistics are retrieved. There is no no version.
Options
Privileged Exec
Mode
222
baseline clns
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5