Baseline Hdlc Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

baseline hdlc interface

baseline hdlc interface interfaceType interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for Cisco HDLC interfaces. The router implements the baseline
Description
by reading and storing the statistics at the time the baseline is set and then subtracting
this baseline whenever baseline-relative statistics are retrieved. There is no no version.
Options
Privileged Exec
Mode
interfaceType One of the following interface types listed in Interface Types and
Specifiers on page 5
pos
serial
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 3: B Commands
baseline hdlc interface
227