Baseline Ip Mobile Home-Agent - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline ip mobile home-agent

baseline ip mobile home-agent
Syntax
Command introduced in JUNOSe Release 9.0.0.
Release Information
Sets a statistics baseline for a specified Mobile IP home agent for control traffic. The
Description
router implements the baseline by reading and storing the statistics at the time the
baseline is set and then subtracting this baseline whenever baseline-relative statistics
are retrieved. There is no no version.
Privileged Exec
Mode
238
baseline ip mobile home-agent