Bgp Maxas-Limit - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

bgp maxas-limit

bgp maxas-limit limit
Syntax
no bgp maxas-limit [ limit ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Causes BGP to check the length of AS paths received in update messages and to not
Description
forward routes whose AS paths are greater than the specified length. The no version
halts checking of the AS path length.
Options
Router Configuration
Mode
limit Maximum acceptable length of a received AS path; number in the range
1–1000
Chapter 3: B Commands
295
bgp maxas-limit