Bgp Default Local-Preference - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bgp default local-preference

bgp default local-preference value
Syntax
no bgp default local-preference [ value ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Changes the default local preference value. Generally, the default value of 100 allows
Description
you to easily define a particular path as less preferable than paths with no local
preference attribute. The preference is sent to all routers in the local AS. The preferred
path is the one with the highest preference value. The no version restores the default
setting.
Options
Router Configuration
Mode
286
bgp default local-preference
value Local preference number in the range 0–4294967295