JUNOSe 11.1.x Command Reference Guide A to M
baseline atm vp interface
baseline atm vp interface atm interfaceSpecifier vpi
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for an ATM virtual path (VP) interface. The router implements
Description
the baseline by reading and storing the statistics at the time the baseline is set and
then subtracting this baseline whenever baseline-relative statistics are retrieved.
There is no no version.
Options
Privileged Exec
Mode
218
baseline atm vp interface
interfaceSpecifier—ATM interface specifier; see Interface Types and Specifiers
on page 5
vpi Virtual path identifier of the PVC. The numeric range depends on the line
module capabilities and current configuration.
Need help?
Do you have a question about the JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 and is the answer not in the manual?