Baseline Ip Udp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 3: B Commands

baseline ip udp

baseline ip udp [ vrf vrfName ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for UDP statistics. The router implements the baseline by
Description
reading and storing the statistics at the time the baseline is set and then subtracting
this baseline whenever baseline-relative statistics are retrieved. There is no no version.
vrfName Name of the VRF; string of 1–32 alphanumeric characters
Options
Privileged Exec
Mode
243
baseline ip udp