Bgp Confederation Peers - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

bgp confederation peers

bgp confederation peers { autonomousSystem [ autonomousSystem ]* |
Syntax
filter-list filterListName }
no bgp confederation peers [ autonomousSystem [ autonomousSystem ]* |
filter-list filterListName ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the sub-ASs that belong to a confederation by listing individual AS numbers
Description
or by reference to an AS-path access list (the filter list). If the remote AS of a peer
appears in the list of sub-AS numbers or in the filter list, then the peer is considered
to be in the same confederation. The no version removes individually specified
sub-ASs, all sub-ASs specified by the filter list, or all sub-ASs from the confederation.
Options
Router Configuration
Mode
autonomousSystem AS number in the range 1– 4294967295
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
filterListName Name of an AS-path access list; a string of up to 32 characters
Chapter 3: B Commands
bgp confederation peers
283