Baseline Local Pool - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline local pool

baseline local pool
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for the router local address pool statistics. The router
Description
implements the baseline by reading and storing the statistics at the time the baseline
is set and then subtracting this baseline whenever baseline-relative statistics are
retrieved. There is no no version.
Privileged Exec
Mode
254
baseline local pool