Baseline Mpls Label - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

baseline mpls label

baseline mpls label { interface interfaceName atm vpi vci | labelValue }
Syntax
Command introduced in JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for the specified MPLS in label. Statistics for an in label must
Description
be enabled with the mpls statistics label command before they can be baselined.
By default, the in-label counters are baselined at zero. There is no no version.
Options
Privileged Exec
Mode
interfaceName Name of interface for label in interface label space on an ATM
AAL5 interface; up to 15 alphanumeric characters
vpi Virtual path identifier for a label, a value in the range 0–255
vci Virtual circuit identifier for a label, a value in the range 33–65535
labelValue Integer identifying a label in the platform label space, a value in the
range 16–1048575
Chapter 3: B Commands
257
baseline mpls label