Baseline Frame-Relay Multilinkinterface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline frame-relay multilinkinterface

baseline frame-relay multilinkinterface interfaceType interfaceSpecifier
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for MLFR links. The router implements the baseline by
Description
reading and storing the statistics at the time the baseline is set and then subtracting
this baseline whenever baseline-relative statistics are retrieved. There is no no version.
Options
Privileged Exec
Mode
226
baseline frame-relay multilinkinterface
interfaceType One of the following interface types listed in Interface Types and
Specifiers on page 5
serial
pos
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5