Bgp Graceful-Restart Stalepaths-Time - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 3: B Commands

bgp graceful-restart stalepaths-time

bgp graceful-restart stalepaths-time seconds
Syntax
no bgp graceful-restart stalepaths-time [ seconds ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the time period after a peer session restart for all peers during which BGP waits
Description
for an End-of-RIB marker from a peer before flushing all stale routes from that peer.
The period is measured from when the session is detected in a down state. The no
version restores the default value, 360 seconds.
seconds Integer in the range 1–3600; default value is 360 seconds
Options
Router Configuration
Mode
293
bgp graceful-restart stalepaths-time