Baseline Ipv6 - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 3: B Commands

baseline ipv6

baseline ipv6 [ udp ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the baseline on general IPv6 traffic statistics as the current value. Use the udp
Description
keyword to set a baseline for UDP statistics. There is no no version.
udp Sets a baseline for UDP statistics
Options
Privileged Exec
Mode
245
baseline ipv6