Baseline Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline interface

baseline interface interfaceType interfaceSpecifier [ vcd ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for an interface or a specific ATM virtual circuit. The router
Description
implements the baseline by reading and storing the statistics at the time the baseline
is set and then subtracting this baseline whenever baseline-relative statistics are
retrieved. There is no no version.
Options
Privileged Exec
Mode
228
baseline interface
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
vcd—Virtual circuit descriptor; number in the range 1–4294967295; an identifier
for the VC in other commands (ATM interfaces only)