Baseline Ip Vrrp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline ip vrrp

baseline ip vrrp
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a statistics baseline for VRRP statistics. The router implements the baseline by
Description
reading and storing the statistics at the time the baseline is set and then subtracting
this baseline whenever baseline-relative statistics are retrieved. There is no no version.
Privileged Exec
Mode
244
baseline ip vrrp