Baseline Ppp Interface - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

baseline ppp interface

baseline ppp interface { atm | fastEthernet | gigabitEthernet | serial | mlppp | pos }
Syntax
interfaceSpecifier
Command introduced before JUNOSe Release 7.1.0.
Release Information
fastEthernet and gigabitEthernet keywords added in JUNOSe Release 11.0.0
Sets a statistics baseline for PPP interfaces. The router implements the baseline by
Description
reading and storing the statistics at the time the baseline is set and then subtracting
this baseline whenever baseline-relative statistics are retrieved. There is no no version.
Options
Privileged Exec
Mode
atm Specifies an ATM interface
fastEthernet Specifies a Fast Ethernet interface
gigabitEthernet Specifies a Gigabit Ethernet interface
mlppp Specifies an MLPPP interface
pos Specifies a POS interface
serial Specifies a serial interface
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
Chapter 3: B Commands
261
baseline ppp interface