Bgp Client-To-Client Reflection - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bgp client-to-client reflection

[ no ] bgp client-to-client reflection
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Restores route reflection from a BGP route reflector to clients. The no version disables
Description
client-to-client reflection. By default, BGP reflects routes received from any route
reflector client to all other route reflector clients. This command can be used to
disable or restore this behavior.
Router Configuration
Mode
280
bgp client-to-client reflection