Baseline Ipv6 Local Pool - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline ipv6 local pool

baseline ipv6 local pool
Syntax
Command introduced in JUNOSe Release 10.1.0.
Release Information
Sets a baseline for the IPv6 local pool prefix assignment statistics. The router
Description
implements the baseline by reading and storing the statistics at the time the baseline
is set and then subtracting this baseline whenever baseline-relative statistics are
retrieved. There is no no version.
Privileged Exec, User Exec
Mode
248
baseline ipv6 local pool