Baseline Ip Tunnel-Reassembly - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline ip tunnel-reassembly

baseline ip tunnel-reassembly
Syntax
Command introduced in JUNOSe Release 8.0.0.
Release Information
Sets a statistics baseline for tunnel reassembly statistics on the current virtual router.
Description
The router implements the baseline by reading and storing the statistics at the time
the baseline is set and then subtracting this baseline whenever you retrieve
baseline-relative statistics. There is no no version.
Privileged Exec
Mode
242
baseline ip tunnel-reassembly