Bandwidth - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

bandwidth

bandwidth bandwidth
Syntax
no bandwidth
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the total bandwidth available on the interface. For total reservable
Description
bandwidth, see the mpls bandwidth command. The no version removes the admission
control configuration from the interface.
Options
Interface Configuration, Subinterface Configuration
Mode
ospf bandwidth
Related Topics
bandwidth—Available bandwidth in kilobits per second, a value from
1–10,000,000
Chapter 3: B Commands
213
bandwidth