Baseline Snmp - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

baseline snmp

baseline snmp
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets a baseline for SNMP statistics. The router implements the baseline by reading
Description
and storing the statistics at the time the baseline is set and then subtracting this
baseline whenever baseline-relative statistics are retrieved. There is no no version.
Privileged Exec
Mode
268
baseline snmp