Bgp Log-Neighbor-Changes - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

bgp log-neighbor-changes

[ no ] bgp log-neighbor-changes
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Causes BGP to log a message of severity notice to the bgpNeighborChanges log
Description
whenever a peer enters or leaves the Established state for any reason. No other
messages are logged to the bgpNeighborChanges log. The no version disables this
log.
Router Configuration
Mode
294
bgp log-neighbor-changes