Include Circuit-Identifier - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

include circuit-identifier

Syntax
Release Information
Description
Options
Mode
704
include circuit-identifier circuitType [ prepend-circuit-type ]
no include circuit-identifier
Command introduced before JunosE Release 7.1.0.
Specifies that the circuit identifier is included when the router automatically generates
a username for an IP service profile. The no version disables inclusion of the circuit
identifier.
circuitType—Type of circuit; atm or vlan
prepend-circuit-type—Specifies that the circuit type is included in the username
IP Service Profile Configuration
Copyright © 2010, Juniper Networks, Inc.