Hostname - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

hostname

Syntax
Release Information
Description
Options
Mode
686
hostname hostname
no hostname
Command introduced before JunosE Release 7.1.0.
Sets the name for the router; this hostname subsequently appears in the router CLI
prompt. The no version removes the hostname from the router.
NOTE: In Domain Map Tunnel Configuration mode, this command has been
replaced by the clear suspicious-control-flow-detection command and may
be removed completely from Domain Map Tunnel Configuration mode in a
future release.
hostname—String of up to 63 characters (no spaces)
Global Configuration
Copyright © 2010, Juniper Networks, Inc.