Hostname - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

Software for e series broadband services routers command reference a to m
Hide thumbs Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
Table of Contents

Advertisement

JunosE 11.2.x Command Reference Guide A to M

hostname

Syntax
Release Information
Description
Options
Mode
686
hostname hostname
no hostname
Command introduced before JunosE Release 7.1.0.
Sets the name for the router; this hostname subsequently appears in the router CLI
prompt. The no version removes the hostname from the router.
NOTE: In Domain Map Tunnel Configuration mode, this command has been replaced
by the clear suspicious-control-flow-detection command and may be removed
completely from Domain Map Tunnel Configuration mode in a future release.
hostname—String of up to 63 characters (no spaces)
Global Configuration
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.2

Table of Contents