Appendix 6. Reinstalling The Ru Software - FujiFilm CR-IR 357 Service Manual

Appendix 6. Reinstalling the RU Software

This appendix describes the RU software reinstallation procedure that is performed when,
for instance, the machine is to be used with the RU's IP address changed or the RU to be
installed is improperly set up.
To reinstall the RU software, first delete the RU registered in the RU PC-TOOL, and then
install the RU software.
1. Deleting an Installed RU
1.
Insert the RU-APL CD-ROM into the CR Console.
→ The "Set Up PC-TOOL" window automatically opens.
2.
Click on [START].
→ The "RU PC-TOOL" window opens.
3.
From "LIST OF EXISTING RU," select an RU.
014-204-01E
11.10.2005 FM4750
4.
Click on [DELETE].
 NOTE 
If you click [DELETE] without inserting the RU-APL CD-ROM into the CR Console, the
following error message appears. If the error message appears, insert the RU-APL CD-
ROM into the CR Console and then repeat steps 2 and beyond.
5.
Click on [OK].
6.
Verify that the RU selected in step 3 is deleted from "LIST OF EXISTING RU."
2. Reinstalling the RU Software
Reinstall the RU software.
For the RU software reinstallation procedure, see "Appendix 7. Installing the RU Software."
{IN: Appendix 7._Installing the RU Software}
CR-IR 357 Service Manual
Appx_IN-44
Appx_IN-44