Chapter 1: Getting Started; About The System; Preparing The System; Installing Or Removing The Battery - FujiFilm SonoSite M-Turbo User Manual

Chapter 1: Getting Started

About the system

The M‐Turbo ultrasound system is a portable,
software‐controlled device using all‐digital
architecture. The system has multiple
configurations and feature sets used to acquire
and display high‐resolution, real‐time
ultrasound images. Features available on your
system depend on system configuration,
transducer, and exam type.
A license key is required to activate the software.
See "A maintenance icon appears on the system
screen. Restart the system. If the issue recurs,
system maintenance may be required. Note the
number that appears in parentheses on the C: line
and contact SonoSite or your SonoSite
representative.Software licensing" on page 82.
On occasion, a software upgrade may be
required. SonoSite provides a USB device
containing the software. One USB device can be
used to upgrade multiple systems.
1
2
Figure 1 System Front Features:
(1) Control panel, (2) Handle, (3) Display, (4) USB
ports for storage, updates, importing, and exporting
1
Figure 2 System Back Connectors:
(1) DC input connector, (2) I/O connector, (3) Battery,
and (4) ECG connector
To use the ultrasound system
1 Attach a transducer.
2 Turn the system on. (For power switch
location, see "System controls" on page 5.)
3 Press the
patient information form.
4 Press an imaging mode key: 2
COLOR

Preparing the system

3

Installing or removing the battery

4 WARNING:
2 3 4
key, and complete the
PATIENT
, or
DOPPLER
To avoid injury to the operator and
to prevent damage to the
ultrasound system, inspect the
battery for leaks prior to installing.
To avoid data loss and to conduct a
safe system shutdown, always keep
a battery in the system.
Chapter 1: Getting Started
, ,
D M MODE
1