Inserting/Removing The Flat Panel Sensor Into/From The Radiographic Examination Stand - FujiFilm FDR ES DR-ID1270 Operation Manual

3.1.4 Inserting/Removing the Flat Panel Sensor into/from the
Radiographic Examination Stand
Follow the procedure below to insert/remove the fl at panel sensor into/from the radiographic
examination stand.
For details, see the Operation Manual for the radiographic examination stand
For the positioning at the time of inserting/removing the fl at panel sensor, see the Operation
Manual for the radiographic examination stand.
Make sure that the fl at panel sensor is installed in the radiographic examination stand securely.
3
Be careful not to have your fi ngers caught when inserting/removing the fl at panel sensor into/
from the radiographic examination stand.
When pulling out/pushing in the tray of the radiographic examination stand after setting the fl at
panel sensor on it, be careful not to drop the fl at panel sensor or damage the tray.
Before inserting/removing the fl at panel sensor into/from the radiographic examination stand,
pull out the tray completely. Otherwise, the fl at panel sensor may be damaged.
3-2
DR-ID1270 Operation Manual
CAUTIONS
CAUTIONS
CAUTIONS
CAUTIONS
CAUTIONS
897N120821E