Ip Ftp Source-Interface - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip ftp source-interface
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip ftp source-interface interfaceType interfaceSpecifier
no ip ftp source-interface [ interfaceType interfaceSpecifier ]
Command introduced before JunosE Release 7.1.0.
Identifies an interface by type and location as the source interface in FTP packets sent
via the router's FTP client. The no version restores the source address in the FTP packets
to that on which the FTP connection is made.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Global Configuration
Chapter 10: I Commands
801
Advertisement
Table of Contents
