Ip-Hint - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ip-hint

Syntax
Release Information
Description
Options
Mode
802
ip-hint { enable | disable }
no ip-hint
Command introduced before JunosE Release 7.1.0.
When enabled, the E Series router preallocates an IP address for the remote (B-RAS)
user before calling authentication. The address is then passed as a hint in the
authentication request to the RADIUS server. The no version disables the feature.
enable—Specifies the feature
disable—Disables the feature; this is the default setting
Domain Map Configuration
Copyright © 2010, Juniper Networks, Inc.