Ip Flow-Cache Timeout - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

ip flow-cache timeout

Syntax
Release Information
Description
Options
Mode
796
ip flow-cache timeout { active activeTimer | inactive inactiveTimer }
no ip flow-cache timeout { active | inactive }
Command introduced before JunosE Release 7.1.0.
Defines the J-Flow activity or inactivity timers. The no version restores the default value
of each timer.
activeTimer—Value of activity timer in the range 0–60 minutes; default value is 30
inactiveTimer—Value of inactivity timer in the range 10–600 seconds; default value
is 15
Global Configuration
Copyright © 2010, Juniper Networks, Inc.