Traffic Class Group Configuration Mode; Tunnel Group Configuration Mode; Tunnel Group Tunnel Configuration Mode - Juniper SYSTEM BASICS - CONFIGURATION GUIDE V 11.1.X Configuration Manual

exit
fabric-strict-priority
help
log
macro
no
run
sleep

Traffic Class Group Configuration Mode

In this mode, you can create and configure traffic-class groups, which can contain
multiple traffic classes.
From Global Configuration mode, type the traffic-class-group command and a
trafficClassGroupName, and press Enter.
host1(config)#traffic-class-group trafclasnameabcd
host1(config-traffic-class-group)#?

Tunnel Group Configuration Mode

In this mode, you can define up to 31 tunnels for a tunnel group.
From Global Configuration mode, type aaa tunnel-group and the groupName, and
press Enter.
host1(config)#aaa tunnel-group storm
host1(config-tunnel-group)#?

Tunnel Group Tunnel Configuration Mode

In this mode, you can configure attributes for a tunnel group tunnel.
Exit from the current command mode
Allow packets in this class to be dequeued out of the
fabric ahead of other traffic classes
Describe the interactive help system
Configure logging settings
Run a CLI macro
Negate a command or set its default(s)
Run an exec mode command (alias command do)
Make the Command Interface pause for a specified duration
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
traffic-class Set the traffic class belong to this group
default Set a command to its default(s)
do Run an exec mode command (alias command run)
exit Exit from the current command mode
help Describe the interactive help system
log Configure logging settings
macro Run a CLI macro
no Negate a command or set its default(s)
run Run an exec mode command (alias command do)
sleep Make the Command Interface pause for a specified duration
tunnel Configure tunnel tag
Chapter 2: Command-Line Interface
Accessing Command Modes
121