4 Repair
4.2.5 Dismantle and mounting tool, 3HAC028920-001
4.2.5 Dismantle and mounting tool, 3HAC028920-001
Dismantle and mounting tool
The dismantle and mounting tool is used to replace shafts and replace bearings
and sealings in several of the following instructions. Only some of the tool parts
are needed in each procedure. The procedure specifies which tool part to be used.
The complete tool set (3HAC028920-001), as follows.
xx1700000383
Part A (hydraulic cylinder) is ordered separately, 3HAC11731-1.
Hydraulic pump is ordered separately, 3HAC13086-1.
192
A
© Copyright 2017 - 2020 ABB. All rights reserved.
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L