Dismantle And Mounting Tool, 3Hac028920-001 - ABB IRB 6700 Series Product Manual

4.2.4 Dismantle and mounting tool, 3HAC028920-001

Dismantle and mounting tool
The dismantle and mounting tool is used to replace shafts and replace bearings
and sealings in several of the following instructions. Only some of the tool parts
are needed in each procedure. The procedure specifies which tool part to be used.
The complete tool set (3HAC028920-001), as follows.
xx1700000383
Part A (hydraulic cylinder) is ordered separately, 3HAC11731-1.
Hydraulic pump is ordered separately, 3HAC13086-1.
Product manual - IRB 6700
3HAC044266-001 Revision: N
4.2.4 Dismantle and mounting tool, 3HAC028920-001
A
© Copyright 2013 - 2018 ABB. All rights reserved.
4 Repair
203