On-Site Transportation; Robot Transportation Precautions - ABB IRB 6700Inv Series Product Manual

2 Installation and commissioning

2.3.1 Robot transportation precautions

2.3 On-site transportation

2.3.1 Robot transportation precautions
General
This section describes ABB approved transportation precautions for ABB robots.
Method 1 - recommended method
Transportation according to method 1 is strongly recommended by ABB.
xx0800000030
Always follow these instructions when transporting an ABB robot according to
method 1:
54
CAUTION
All transportation in or outside the plant, must be carried out according to the
method described in this section.
Transportation in any other way can seriously damage the robot. If the robot
is incorrectly transported and the instructions are not followed, the robot is
not covered by the warranty and ABB will not accept any compensation claim.
• Always remove the tool before transportation of the robot.
• Always place the robot in the ABB recommended transport position, described
in section Risk of tipping/stability on page
• Always read and follow the instructions in section
on page 42
• Always use the transportation lock screw during lifting, turning and
transporting of the robot, see
and transportation on page
© Copyright 2017 - 2020 ABB. All rights reserved.
50.
Pre-installation procedure
Securing the robot arm position for lift, rotation
55.
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L