ABB IRB 6700Inv Series Product Manual page 403

3
4
5
6
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L
Action
Put the radial sealing on the Press tool J.
Note
Make sure that the sealing is turned accord-
ing to the figure.
Use a plastic mallet or similar on the Press
tool J and refit the radial sealing.
Apply some grease on the surface for the
bearing.
Press in the spherical roller bearing using
the dismantle and mounting tool, according
to user instructions enclosed with the
equipment.
xx0900000813
Go to the user instructions enclosed with
the press tool.
DANGER
Handling the tool incorrectly will cause
serious injury.
Read and follow enclosed user instructions
for the tool.
© Copyright 2017 - 2020 ABB. All rights reserved.
4.6.1 Replacing the spherical roller bearing
Note
Press tool J included in tool set Dismantle
and mounting tool set
xx1300000839
xx1300000777
Dismantle and mounting tool set:
3HAC028920-001
User instructions are enclosed with the
tool.
Continues on next page
4 Repair
Continued
403