ABB IRB 6700Inv Series Product Manual page 336

4 Repair
4.5.4 Replacing the process turning disc
Continued
Refitting the process turning disc
1
2
3
Concluding procedure
1
336
Action
Wipe clean the contacts surfaces.
Foundry Plus:
Apply Mercasol on the surfaces on the
process turning disc and axis-6 gearbox
as shown in the figure.
Secure the process turning disc with its
attachment screws and washers.
Action
DANGER
Make sure all safety requirements are met
when performing the first test run.
© Copyright 2017 - 2020 ABB. All rights reserved.
Note
The figure show standard turning disc.
Surfaces to apply Mercasol on are the
same with process turning disc.
Tightening torque: 70 Nm
Attachment screws: M10x25, Steel 12.9
Gleitmo 603, (21 pcs)
Washers: Steel (21 pcs)
Note
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L
B
A