ABB IRB 6700Inv Series Product Manual page 87

Required consumables
Consumable
Cable straps
Installing the cooling fan
Use these procedures to install the cooling fan.
Installing the fan
1
2
3
4
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L
Action
Move the robot to its synchronization position.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded
space.
Remove the metal sheet frame from the fan unit
assembly by loosening the six screws.
Loosen the two tightening screws so they don´t
damage the motor surface during installation.
© Copyright 2017 - 2020 ABB. All rights reserved.
2 Installation and commissioning
2.7.2 Installing the motor cooling fan (option)
Article number Note
-
Note
xx1800000157
xx1800000159
Continued
Continues on next page
87