ABB IRB 6700Inv Series Product Manual page 443

6
7
8
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L
4.6.3 Replacing the rear bearings on the balancing device
Action
IRB 6700 -300/2.70, -245/3.00
Use caution and put radial sealing and
groove ball bearing onto the shaft end
manually.
Put the shaft end with the fitted parts, on
the threaded bar.
Manually press the shaft end into the cradle
a little.
© Copyright 2017 - 2020 ABB. All rights reserved.
Note
A
B C
xx1400001996
A Radial sealing with dustlip(2 pcs)
B Retaining ring bore (2 pcs)
C VK-cover (2 pcs)
D Groove ball bearing (2 pcs)
Continues on next page
4 Repair
Continued
D
443