ABB IRB 6700Inv Series Product Manual page 209

4
5
6
7
8
9
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L
Action
Jog the robot into position:
• Axis 1: 0°
• Axis 2: already in position and locked with
the transportation lock screw, do not jog!
• Axis 3: +65°
• Axis 4: 0°
• Axis 5: +60°
• Axis 6: no significance
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded
space.
Disconnect the robot cables at the base.
CAUTION
The weight of the IRB 6700Inv robot is 1,750 kg
All lifting accessories used must be sized accord-
ingly.
Install the fork lift pockets to the robot, if not
already installed.
If lifting and turning with the fork lift (rotator attach-
ment required):
1 Insert the forks of the fork lift truck into the
fork lift pockets, as far as possible.
2 Raise the forks of the fork lift truck to make
sure that the weight of the robot rests on
the forks.
Tip
Two M16 screws can be fitted to the fork
lift pockets, to press the forks against the
pockets and make the lift more stable.
© Copyright 2017 - 2020 ABB. All rights reserved.
4.3.4 Lifting down the robot from inverted position
Note
xx1700000555
See user instructions enclosed with
the fork lift accessory set.
Fork lift accessory set:
3HAC058825-001.
4 Repair
Continued
600 50
Continues on next page
209