Recommendations For Floor Mounting - ABB IRT 710 Product Manual

3 Installation and commissioning

3.4.7.2 Recommendations for floor mounting

3.4.7.2 Recommendations for floor mounting
Mounting bolts
Chemical anchor bolts are recommended to secure the track motion IRT 710 to
the floor. However, the mounting bolts are not supplied since they must be selected
on the basis of the material the foundation is made of.
Choose mounting bolts so that they:
Section view of the IRT 710 anchor
xx2200001274
Securing the assembled track to the floor
1
Continues on next page
128
• Are suitable for the foundation.
• Can bear the dynamic loads.
• Are able to bear the combined dynamic loads that can occur when the
manipulator and carriage move.
• Fit in the holes in the stand, Ø 18.5 mm.
Action
After assembly, all the levelling screws should touch the floor. Adjust if necessary
and tighten the locking nut.
© Copyright 2023 ABB. All rights reserved.
Product manual - IRT 710
3HKA00000186299-001 Revision: B