ABB IRB 6700Inv Series Product Manual page 487

4
5
6
Product manual - IRB 6700Inv
3HAC058254-001 Revision: L
Action
Make sure the o-ring is seated in the groove.
Tip
Lubricate the o-ring with some grease for a better
fitting in the groove.
If the motor is a new spare part, remove the cover.
Foundry Plus:
Valid for axis-2, axis-3, axis-4 and axis-6 motors.
If the motor is a new spare part, the evacuation
hole protection filter must be replaced with a
transparent plug/sight glass (enclosed with the
spare part delivery). Remove the protection filter
and install the transparent plug/sight glass.
On the axis-6 motor there are two protection filters
that must be replaced with transparent plugs/sight
glasses.
xx1800000101 xx1800000102
Protection filter (Stand- Transparent plug
ard). (Foundry Plus).
© Copyright 2017 - 2020 ABB. All rights reserved.
4 Repair
4.7.3 Replacing the axis-3 motor
Continued
Note
xx1200001020
xx1200001135
Tightening torque, transparent
plug: 25 Nm ±10%.
Tightening torque, protection filter:
10 Nm ±10%.
xx1600000576
Continues on next page
487